GRP WATER TANK
Technology & Innovation
HAYOUNG Corporation
HAYOUNG Corporation
INSTALLATION
PREPARATION FOR INSTALLATION
Base Concrete Foundation
1. Foundation work should be done by the customer pursuant to all specificaions and considering ground durability /
stability of the site where the tank is to be located.
2. The strength of concrete for the foundation work should have physical properties of over 180kg/c㎡
3. The top of the concrete foundation shall be plastered so as to maintain leveling and finished mortar under 20mm in thickness
stability of the site where the tank is to be located.
2. The strength of concrete for the foundation work should have physical properties of over 180kg/c㎡
3. The top of the concrete foundation shall be plastered so as to maintain leveling and finished mortar under 20mm in thickness
Pipe Work
1. Client shall decide inlet, outlet and drainage place of water tank and those nozzles dimension
when place a thank order. Our custom assembles nozzles for piping only.
2. Client shall carry out nozzle connection for piping, piping work.
when place a thank order. Our custom assembles nozzles for piping only.
2. Client shall carry out nozzle connection for piping, piping work.
BASE CONCRETE FOUNDATION STANDARD
| Width | 300 ~ 400mm |
|---|---|
| Height | over 600mm (Base frame included) |
| Horizontal degree | less than 1/50 (Surface has to be horizon flat) |
| Outer Dimension | Width, Length + 400mm |
| Space | less than 1m |
GRP WATER TANK INSTALLATION SPACE
For maintenance and repaining, it is recommended to leave at least 600mm and 1,000mm extra
space from wall and ceiling of tank room,
Example : 3W x 4L x 2mH
space from wall and ceiling of tank room,
Example : 3W x 4L x 2mH
